repeater down?

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
  • #10916

    I’m net control tonight, and am getting nothing back from the repeater, and no response on simplex. Am I the only one?

    David, KM6DOV

    Same here. I called out on the output of the repeater, and didn’t get any responses. Perhaps we can move to the .805/.865 for tonight?


    Thanks for coming back. Yes, let’s move the net to the .805 repeater, CTL95.


    Hi Jeneen,
    yes same here. I just called Linda. Since Peter is away Linda and I will go take a look at it tomorrow.
    Can we run the net on the 805 or shall we just go simplex?

    Joseph, K9JOE

    I’m getting nothing either.
    This is why we test/use it on a regular basis.

    • This reply was modified 2 years, 6 months ago by Joseph, K9JOE.
    David, KM6DOV

    Pat, Neil, or someone else with a good simplex drill score should call out the move on the W6SCF repeater output, in case people aren’t watching the board.


    So, the repeater is down. Everyone please monitor the .805 (CTL95) repeater instead until further notice.

    Casey, KA5WAX

    …ah good to know it wasn’t just us down in the Canyon.

    David, KM6DOV

    Sounds like Will fixed it!

    Casey, KA5WAX

    hey it does seem to be up!

    FWIW the 805 doesn’t reach well into butano canyon proper. we’ll do some more testing about the place.

Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.